2022-4-26 10:36| 發布者: steelfu4mo| 查看: 1170| 評論: 0 |原作者: 佛山萬慶物資
我國pcm彩涂板近年以來新增產能主要以高端建筑、家電板材發展定位為主。在建筑方面，關注高端建筑彩涂產品研發應用，如絨面、網紋彩涂、冷屋面彩涂、鋁鎂錳系列彩涂等高端裝飾產品。
In recent years, China's pcm color coating plate new production capacity is mainly high-end buildings, home appliances plate development positioning.In the aspect of architecture, pay attention to the research and development and application of high-end architectural color coating products, such as suede, mesh color coating, cold roof color coating, aluminum magnesium manganese series color coating and other high-end decorative products.
pcm彩涂板良好的外觀和優異的性能喚醒了建筑設計師和屋主顯現屋頂?shù)呐d趣，屋頂再也不是僅僅滿足遮風擋雨的功能而需要具有設計特征。用彩涂板制作的屋頂系統可以增添其他建筑元素的色彩，可以獲得屋頂板板輻和接縫大范圍變化所帶來的效果。彩涂板建筑屋頂坡度較陡，典型值為3：12甚至更高，以利于快速排泄雨水。坡度小的屋頂不易看見，通常選用鍍鋁鋅光板，對于坡度小于1/4：12屋頂，采用鍍鋁鋅光板更加經濟，事實證明經過20年使用后仍保持優異的性能。屋頂板通常不直接安放在屋檁上而放置在骨架上，骨架可以是木制或鋼制。在屋頂板和支架之間通常墊放30磅后的紙或類似材料。部分彩涂板屋頂設計成屋頂結構直接接觸的形式。屋頂板通常為扁平形狀，10～24英尺寬?？梢圆捎眉?xì)小的縱向肋條提高強度和成型。使用穿透鋼板緊固件或是隱蔽的夾件將鋼板固定在骨架上。屋頂板疊放或縱向焊合在一起。焊接方式分為撐條(batten)式和咬合(snap-together)式，撐條式又可細分為傳統的箱式、帽式和整體式。焊縫典型高度約3/4～2英寸。經咬合及傳統箱式方法焊接的屋頂板采用隱蔽的夾件或固定在焊縫上的鐵角緊固在骨架上，整體式焊接的屋頂板通過鐵箍或隱蔽的緊固件固定在骨架上?；顒?dòng)的鐵箍和鐵角設計可以防止屋頂板熱脹冷縮。
The good appearance and excellent performance of pcm color coating has awakened the interest of the architect and the roof, which is no longer only meeting the function and needs to have design characteristics.A roof system made of color-coated panels can add color to other architectural elements, obtaining the effect of a wide range of changes in the roof panels and joints.The roof of the painted building is steep with a typical value of 3:12 or higher to facilitate rapid discharge of rainwater.The roof with a small slope is not easy to see, the aluminous galvanized sheet is usually used, for the slope is less than 1 / 4:12 roof, the aluminous galvanized sheet is more economical, it has been proved that still maintaining excellent performance after 20 years of use.Roof panels are usually not placed directly on house purlins but on skeletons, which can be wooden or steel.Paper or similar material usually placed 30 pounds between the roof board and the bracket.Part of the color-coated board roof is designed in the form of direct contact with the roof structure.The roof panels are usually flat in shape and range from 10 to 24 feet wide.Small longitudinal ribs can be used to improve the strength and molding.Attach the steel plate to the skeleton using penetrating steel plate fasteners or concealed clamps.Roof panels are stacked or vertically welded together.The welding mode is divided into support bar (batten) type and occlusal (snap-together) type, which can be subdivided into the traditional box type, cap type and integral type.Typical weld height is about 3 / 4 to 2 inches.The roof plates welded by occlusion and traditional box type method are fastened to the skeleton by concealed clamps or iron angles fixed to the weld, and the integral welded roof plates are fixed to the skeleton by iron hoop or concealed fasteners.Active iron hoop and iron corner design can prevent the roof plate from hot expansion and cold shrinking.
建筑面板生產廠商能夠大范圍提供不同形狀彩涂墻面板，寬大正面的所有區域的墻面板外觀和所需的建筑效果能夠完全一致。高質量的pcm彩涂板可以確保整個項目的鋼板色彩和外觀保持一致。同樣，由于使用一樣的材料可以最大限度減少連接和轉接技術問題，所以，對整體設計效果有關鍵影響的部件(trimwork,stops,copings)等可以采用大面積外覆件同樣的材料、色彩和處理。
Building panel manufacturers can provide a wide range of different shapes of a painted wall panel, the wide front of all areas of the wall panel appearance and the desired architectural effect can be completely consistent.High quality color coated plates ensure consistent plate color and appearance throughout the project.Similarly, because the use of the same material can minimize connection and transfer technology problems, the overall stops, copings (trimwork, s t o p s) can use the same material, color and treatment of large area covers.