2022-3-26 14:48| 發布者: steelfu4mo| 查看: 1577| 評論: 0 |原作者: 佛山萬慶物資
注：關于本產品標題，由于商品標題搜索功能的特性，為方便采購方的購物搜索，所起標題關鍵詞僅適用于搜索功能，不涉及廣告宣傳和功能描述。
溫馨提示：由于現貨市場浮動較大，店鋪所有規格均為參考價格，具體報價請咨詢客服，謝謝！
vcm覆膜板是鋼板材料，又稱彩色薄板。 vcm覆膜板是先將 vcm板送入金屬基板加熱裝置內加熱至180° C高溫，然后立即將 VCM裝飾膜送入上下覆合輥中間，利用上下覆合輥的壓力和高溫，使 vcm板裝飾膜熱熔到金屬基板上，牢固地在一起，并將 vcm裝飾膜置于上下覆合輥中間，利用上下覆合輥的壓力和高溫，使 vcm板裝飾膜的熱熔牢固。pvc覆膜板采用高溫壓制復合而成，其致密、強度高，韌性強。靜態彎曲強度比木材高一倍以上。覆膜寬，接合部位少，與鋁鋼模板相比，支撐和拆卸的速度要快很多。與此同時，它的建設成本也比較低，能有效地縮短工期。此外，這種材質更輕便，剪釘性能更好，因此使用起來非常方便，速度也會更快。pvc覆膜板的耐水性很強，在制造過程中，層板都用酚醛樹脂，然后熱壓，所以面板使用后不易變形。與此同時，它的熱導率遠低于鋼膜，所以在夏季和冬季均可正常施工。就周轉率而言，覆膜板比一般的建筑模板要高得多。很明顯，這類材料的應用范圍非常廣泛，不管是剪力墻、地鐵、立交橋、隧道或其他類型的建筑。
The vcm coated sheet is a steel plate material, also known as the color sheet.The vcm coating board is to first heat the vcm plate into the metal substrate heating device to 180 C high temperature, and then immediately send the VCM decorative film into the middle of the upper and lower covering roller, using the pressure and high temperature of the upper and lower covering roller, the vcm plate decorative film hot melt to the metal substrate, firmly together, and the vcm decorative film in the middle of the upper and lower covering roll, using the pressure and high temperature of the vcm plate decorative film heat melt firmly.The pvc film mulching plate is made of high temperature suppression composite, which is dense, high strength and strong toughness.Static bending strength is more than twice as high as that of wood.Wide film, less joints, and aluminum steel formwork, support and disassembly speed is much faster.At the same time, its construction cost is also relatively low, which can effectively shorten the construction period.In addition, the material is lighter and cut nails better, so it is very convenient to use and faster.The water resistance of pvc coated plate is very strong. During the manufacturing process, the laminates are made of phenolic resin and then hot pressed, so the panel is not easy to deform after use.At the same time, its thermal conductivity is much lower than the steel film, so it can be constructed normally in both summer and winter.In terms of the turnover rate, the coated panels are much higher than the average building template.It is clear that such materials are widely used, whether it is shear walls, subways, overpasses, tunnels, or other types of buildings.