2021-12-6 09:55| 發布者: steelfu4mo| 查看: 1258| 評論: 0 |原作者: 佛山萬慶物資
家電生產過程的節能減排近年來也得到了高度重視，許多地方政府已經限制新上噴涂生產線，并要求對排放不達標的舊噴涂線進行環保改造，這將促使家電企業直接采用彩涂板，放棄原來的鍍鋅或者冷軋板磷化噴涂工藝，部分工作環境較好的室內家電外殼材料正在考慮用較低膜厚的彩色耐指紋鋼板代替噴粉鍍鋅鋼板或彩涂板。
Home appliance production process of energy conservation and emission reduction has also attached great importance in recent years, many local governments have restricted the new spraying production line, and requires the emission of substandard old spraying line environmental protection transformation, this will promote home appliance enterprises directly use color coating, give up the original galvanized or cold rolled board phosphorus coating process, part of the working environment of indoor home appliance shell materials is considering with lower film thick color fingerprint plate instead of powder galvanized steel plate or color coating.
傳統的家電涂裝主要是噴粉、貼膜兩種，家電側板主要是噴粉，而面板主要以噴粉和貼膜為主。噴粉屬“后涂裝”工藝，家電外殼在加工成型后噴粉涂裝，其涂膜厚、成本高、效率低、花色品種單一，而且占用空間大，所以無法滿足日新月異的家電市場要求。
Traditional home appliance painting is mainly powder, film two kinds, home appliance side board is mainly powder, and the panel is mainly powder and film.Powder spraying belongs to the "post-painting" process, the home appliance shell is coated after processing and molding, its thick coating film, high cost, low efficiency, single color variety, and occupy a large space, so it cannot meet the ever-changing requirements of the home appliance market.
家電預涂彩板是將涂裝好的金屬板材裁剪成要求的規格，直接加工組裝成型，簡化了生產工藝，提高了生產效率，節省了投資和運轉費用。因?yàn)轭A(yù)涂彩板在加工過程中試將成卷的金屬板材涂上涂料，經過烘烤固化成膜，這種涂裝方式生產效率高，烘烤過程中產生的有機溶劑廢棄可以收集焚燒，有利于節能環保，所以近幾年預涂家電彩板的發展相當迅猛。
Home appliance pre-painted color plate is to cut the painted metal plate into the required specifications, direct processing, assembly and molding, simplify the production process, improve the production efficiency, save investment and operation costs.Because the pre-painted metal plate will be coated in the processing process, baked and solidified into a film, this coating method has high production efficiency, the organic solvents produced in the baking process can be collected and incineration, conducive to energy saving and environmental protection, so the development of pre-painted home appliance color plate is quite rapidly in recent years.
