2022-5-9 09:40| 發布者: steelfu4mo| 查看: 2373| 評論: 0 |原作者: 佛山萬慶物資
合理的選材可以在滿足使用要求的同時最大限度的降低成本，不合理的選材則會導致成本增加或產品不合格，所以客戶應高度重視合理選材的重要性，佛山市萬慶物資有限公司提供售前技術服務，為客戶的選材提出專業性的意見和建議。
Reasonable material selection can meet the requirements of use at the same time minimize cost, unreasonable material will lead to the cost increase or unqualified products, so the customer should attach great importance to the importance of reasonable material selection, Foshan Wanqing materials co., LTD., provide pre-sale technical services, put forward professional opinions and Suggestions.
白色彩涂板選材關注的指標主要包括：力學性能、基板類型和鍍層重量、正面涂層性能和反面涂層性能。
The indicators of white color coating board material selection mainly include: mechanical properties, substrate type and coating weight, front coating performance and reverse coating performance.
新宇彩涂板的產品質量不僅由基材和涂料的基本性能決定，還取決于生產工藝及操作控制技術。操作控制技術對彩涂板產品的物理性能、表面質量影響較大，從生產工藝分析生產控制技術重點應包括清洗處理、化涂處理、涂裝（含初涂、精涂）、固化4個環節。
The product quality of Xinyu color coating board is not only determined by the basic performance of the substrate and coating, but also depends on the production process and operation control technology.Operation and control technology has a great impact on the physical performance and surface quality of color coating board products. From the production process analysis, the production control technology should include cleaning treatment, chemical coating treatment, coating (including initial coating, fine coating) and curing.
新宇彩涂板生產采用兩涂兩烘生產工藝。為了保證彩涂產品涂層質量，需要在涂敷之前對基材表面進行除油、除塵、除銹等前期處理工作，這是保證涂裝工藝的第一步，也是保證彩涂板產品質量的基礎工作。生產過程中，固化是關鍵工序，涂料涂敷到鋼板上后，需加熱使?jié)裢繉又械娜軇┑靡該]發，同時使有機物在催化劑的作用下發生聚合或交聯反應。
Xinyu color coating board production adopts two coating and two drying production process.In order to ensure the coating quality of color coating products, it is necessary to carry out oil removal, dust removal and rust removal on the substrate surface before coating, which is the first step to ensure the coating process, and also the basic work to ensure the quality of color coating board products.In the production process, curing is the key process. After the coating is applied to the steel plate, it is necessary to heat to volatilize the solvent in the wet coating, and polymerize or crosslink the organic matter under the action of the catalyst.