2022-4-18 16:39| 發布者: steelfu4mo| 查看: 1137| 評論: 0 |原作者: 佛山萬慶物資
整個機組包括以下四部分:入口段、預處理段、涂裝段、出口段。常見的二涂二烘彩涂生產線的工藝流程為:開卷→縫合→入口活套→清洗→預處理→初(精)涂裝→初(精)固化→冷卻→出口活套→剪切→卷取。
The whole unit includes the following four parts: inlet section, pretreatment section, coating section and exit section.The common process of the second coating and second drying color coating production line is: open coil and suture inlet live sleeve cleaning pretreatment initial (fine) coating initial (fine) curing cooling outlet live sleeve shear roll take.
入口段:包括開卷、剪齊、縫接及貯料活套等設備，作用是將原料卷松開并將它們聯接起來，以便連續地、勻速地為機組供應金屬薄板。
Entrance section: including open roll, cutting, seam and storage sleeve, designed to release and connect them to supply metal sheet to the unit continuously and uniformly.
預處理段:清洗被涂底板并進行表面處理，以提高防腐蝕性和對上層漆膜的附著力。
Pretreatment section: clean the coated bottom plate and conduct surface treatment to improve corrosion resistance and adhesion to the upper paint film.
涂裝段:是整個機組的核心部分，通常采用正、反兩面同時涂裝的二涂二烘工藝，即涂底漆(初涂) →烘烤固化→冷卻→涂面漆(精涂)→烘烤固化→冷卻。隨產品要求不同，還可以只一涂一烘或只涂單面。涂漆時可采用逆向或順輥涂施工。爐溫分段控制，各段溫度取決于所用涂料品種、底板厚度及通過烘爐的時間。
Painting section: is the core part of the whole unit, usually using the positive and reverse sides of the two coating two drying process, that is, coating primer (first coating) baking curing cooling coating paint (fine coating) baking curing cooling.With different product requirements, can also be only one drying or only a single surface.Painting can be used in reverse or roll roll coating construction.Furnace temperature section control, the temperature of each section depends on the coating type used, the bottom plate thickness and the time through the oven.
優良的pcm彩涂板產品品質是確保良好使用效果的前提，合理的選材不僅可以最大降低成本，還是實現您期望的使用效果的重要保證。
Excellent color coating board product quality is the premise to ensure a good use effect, reasonable material selection can not only reduce the cost, but also an important guarantee to achieve your desired use effect.